3D models

Boosted by the AI-injected feature of Artec Studio 15 called HD Mode, the scanner managed to capture all the teeny details of the engine in high resolution with no help from scanning spray or markers.

California office chair • Leo

What appears to be a normal, everyday office chair, plucked from the glass and steel confines of a typical high-tech office in sunny California, serves as a fine example of capturing modern furniture with Artec Leo.

Part of a mining machine • Leo

This 3D scanning project embodies a confluence of factors that could have complicated effective capture and reconstruction of the wild variety of shapes that needed to be captured and reconstructed in this case.

Shampoo bottle cap • Micro

The cap was made of semi-transparent plastic and required a bit of dusting with an airbrush. Then it was mounted on the scanner’s rotating platform with a clamp. A couple of mouse clicks — and scanning commenced.

Doom combat scene • Combo

The craftsman who created this feast for the eyes definitely put a great deal of effort into their work. So did Artec Space Spider and Eva, the two handheld 3D scanners which were used to capture everything down to the finest features of this geometry-rich object in order to make the 3D model look as impressive as the original work of art, inspired by Doom, the epic shooter.

Drain Weasel wand connector • Micro

Easily captured with the desktop high-resolution 3D scanner Artec Micro, this tiny plastic wand connector section of a Drain Weasel would be a challenge for many other 3D scanners.

Dual-clutch gearbox • Leo

Yes, this is one of those dandy not-so-little devices that no one wants to hear their mechanic talking about, especially not while he’s rubbing his hands together and has a certain little gleam in his eye.

Large iron machine part • Leo

Artec Leo is often called in when the height of the object to be 3D scanned approximates that of a Yeti. Why?

Electrical outlet • Micro

Plastic can reflect light directed at it. That’s simple yet very useful info for someone who wants to have an electrical outlet 3D scanned.

Screw • Micro

Small object — big challenge. How do you capture the thread of this 10 mm long screw using a 3D scanner?

Troll • Leo

This ordinary office Troll was scanned with an Artec Leo 3D scanner. In exchange for the promise of some meaty morsels, the troll agreed to pose for the scanning by leaning on a chair that was later removed during post-processing in Artec Studio.

Lion statue • Leo

This lion is one of two nearly identical bronze animals prowling alongside the steps of a town hall. Mounted on a pedestal, it was a bit hard to reach, but not for Leo — its namesake!

Crocodile statue • Leo

Part of an outdoor fountain basin, this 3D model of a croc was created with the Artec Leo 3D scanner and the powerful Artec Studio software.

Car body • Leo

Taking only 20 minutes to scan the whole car, and just under one and a half hours to process the captured 3D data, this highly accurate 3D model was ready in under two hours from start to finish.

Fountain basin • Leo

Leo was able to scan this fountain’s 7-meter basin in just under fifty minutes, with no need for additional preparation or the use of extra features to improve the scanner’s tracking.

Copper key • Micro

A copper key scanned with Artec Micro. The key had to be sprayed due to its reflective surface.

Plastic bolt • Micro

Despite its complex geometry and reflective surface, this 1.5 cm plastic bolt was captured using the ultra-precise Artec Micro in just three scans.

Metal nut • Micro

A metal nut, just over 15 mm, easily scanned with Artec Micro in just two scans. Unlike handheld scanners, Micro was able to scan this piece without the need for any additional features or background.

Pipe bend • Micro

A pipe bend, scanned with Artec Micro. It took only two scans using the simple trajectory to get the full shape of the pipe.

Plaster cast of teeth • Micro

This object is considered as «large» for trajectory purposes. Although we used only a «simple» type of trajectory, with fewer frames, all of the intricate curvatures were successfully captured.

Metal cutting blade • Space Spider

This cutting blade was a great training instrument for scanning thin objects.

Turbine • Space Spider

This small turbine was scanned in three passes using a rotating table — this enabled the operator to easily capture all the curves from different angles with less hand motion.

Mushroom (pleurotus eryngii) • Space Spider

This pleurotus eryngii mushroom was very easy to scan due to its size and thickness.

Motorbike • Combo

This motorcycle was scanned with both Eva and Space Spider. Eva allowed for fast and easy acquisition of the overall shape, while Space Spider was used to scan the intricate geometry of the wheels and the sides.

OBJ 3D models