Artec Eva 3D scanner is used to develop ergonomic exoskeletons
A research group in Belgium is boosting the capabilities of powered exoskeletons by customizing their design with the help of 3D scanning, CAD and 3D printing.
Kevin Langlois, a PhD researcher at Vrije Universiteit Brussel (Free University of Brussels), believes that mankind is on the verge of a technological revolution that will radically change our way of life. Kevin is a member of the university’s Robotics & Multibody Mechanics (R&MM) research group, whose main area of focus is wearable robotics, such as powered exoskeletons. Kevin believes that robotic assistive technology is one of those major technologies that can help to keep health care costs under control, because it contributes to keeping people mobile, less dependent on care and decreases the risk of secondary health effects of immobility.
“Exoskeletons are here and are part of this forthcoming fundamental change,” says Kevin. “This technology shows promising results in injury rehabilitation practices, human power augmentation, and risk prevention and assistance in daily activities.”
R&MM’s MIRAD, a powered assistive exoskeleton, equipped with adjustable orthoses
Despite the fact that remarkable progress has been made in this research area, a major problem has yet to be solved: How to achieve perfect interaction between a human being and their robotized exoskeleton? On the mechanical level, this question boils down to how to achieve absolute adhesion between the two entities.
This question is not that easy to answer, given that each person is unique anthropometrically (the dimensions of the limbs and their capabilities) and biomechanically (the way the person walks). This suggests that you need a customized solution for each individual.
Ready-made solutions are not the best option, R&MM’s experience shows. Initially, the group started out by purchasing adjustable orthoses for their research that were attached to the body by straps and brackets. These fixtures, however, turned out to get misplaced quite often, resulting in inefficient performance of the exoskeleton.
An alternative solution was then found – using 3D scanning to capture the individual anatomy of the subject and designing an orthosis that would replicate it smoothly. Specifically, the physical interfaces of the exoskeleton are 3D scanned as these are the mechanical connections between the human and robot. This way you can achieve stiffer adhesion and increase the robustness of the exoskeleton without compromising on the user’s comfort. To this end, the group acquired Artec Eva high-precision 3D scanner from Artec’s Gold Partner 4C Creative CAD CAM Consultants.
“Currently research in this area is rare. Until now, most research was focused on the foundations of these machines, actuation and control. Now comes the time to integrate the human to these systems,” says Kevin. “Therefore, at the R&MM lab we decided to use 3D scanning technology to develop novel solutions.”
A digital model of a shank, reconstructed using Artec Eva 3D scanner
“Now we use Artec Eva and it helps design and produce individualized orthoses which can have benefits compared to adjustable orthoses,” says Kevin. “The Eva scanner provides a scan process that is fast (less than 5 minutes) and accurate to compile a digital image of the patient. Using this 3D scanning device to produce orthoses takes less time and effort compared to using a plaster mold.”
Based on biomechanics literature one can estimate the torques, or forces, that need to be transferred to the subject’s joints (ankle, knee and hip) in order to provide assistance during walking, since the MIRAD exoskeleton powers the hip, knee and ankle joints for both legs. Along with this information and the knowledge about pain pressure thresholds (PPT), i.e. maximum pressure a human can endure on a specific anatomical region before feeling pain, an orthotic prototype can be designed.
A key feature of the actuator is the use of a tunable elastic element - a spring with variable pretension - in series with an electric drive. Its characteristics are well suited for powered exoskeletons: energy storage, increased peak power delivery, tolerance to impact loads and low output impedance. As opposed to conventional "stiff" or "rigid" actuators - like geared drives - this compliant actuator naturally allows deviations from the target position when external forces are applied by the user.
“The Artec Eva 3D scanner allows us to incorporate all these parameters into a compact and ergonomic orthosis,” says Kevin.
3D scanning a subject’s shank at the R&MM lab
To make a customized orthosis, Kevin first selects the areas that need to be captured, for example, the shank. Then he selects one or more subjects on which the orthosis will be tested. These subjects are scanned, and the data is processed in Artec Studio 3D software.
“Generating an .STL file from the scans is a straightforward process inside Artec Studio,” says Kevin. “The critical point is to gather high-quality scans, to not leave any holes in the model, and to facilitate the alignment of the scans. The Sharp Fusion tool will precisely fuse the scans together and generate the final model. I conclude that the Artec Studio software provides an intuitive interface, and powerful tools allowing scientists and engineers to perform research in the area of wearable robotics.”
Digital design of the individualized orthotic prototype
After post-processing, the .STL file is exported to CAD software, where a tightly fitting orthotic device is designed. The final step is to produce the orthosis using additive manufacturing. After the orthosis has been 3D printed, it is reinforced with carbon fibers and an epoxy composite.
The use of 3D scanning and 3D printing is especially beneficial, as opposed to using a plaster mold, as it allows for a digital record to be saved on file. Having a digital record provides an advantage from a design perspective, as it allows the subject to fully integrate the human to the design of the robot. It also provides more freedom on the production or manufacturing options of the orthosis, allowing the use of Computer Aided Manufacturing (CAM) techniques, such as 3D printing. This in turn can potentially reduce costs and improve quality and applicability of the products.
Experiments are currently under way to identify the benefits of this design. “The goal of these experiments is to demonstrate the effectiveness of individualized orthoses based on the construction of a digital record of the subject,” says Kevin. “and one day, the goal will be to allow humans to wear an exoskeleton that will be almost invisible to others and to a certain degree, to the wearer himself! 3D scanning technology is a promising tool to achieve this.”
They say that all roads lead to Rome. And in one case, a smooth journey from Canada to the Vatican was ensured via the use of 3D scanning.
A researcher focused on high-throughput phenotyping of perennial ryegrass needed a way to non-destructively measure 160 individual plants in the field 6-8 times over the duration of his project, to help identify specific plants with the most desirable traits for plant breeders and farmers.
If you’d like to learn more about HD Mode and what improvements you can expect, make sure to watch one of the latest workshops by Artec 3D training and 3D scanning specialist Anton Popov.