3D scanning solutions

How Artec 3D is supporting Ukraine

STL 3D models

Scanned using Artec 3D technology
Leo HD

Shiny parts and repetitive patterns might seem like an obvious challenge for many, but with the 2022 Artec Leo, this axle shaft was captured in fine detail in just 10 minutes.

Leo HD

The comb-over & fade along with the boxed beard were faithfully recreated in myriads of submillimeter-accurate polygons and packed into a 3D model file in .stl format.

Leo HD

This detailed, high-resolution model of a shiny piece of metal with lots of holes and hard to reach areas was created, start to finish, in a total of about 35 minutes.

Leo HD

This popular and versatile model of a skid-steer loader was captured in high-resolution 3D with Artec Leo in HD Mode within 90 minutes.

Leo HD

This small and lightweight off-road vehicle was manually assembled pretty much from scratch by its owner – and its journey didn’t end there.

Leo HD

Shiny parts with lots of small details, holes, fine lines, and sharp edges are no longer something to fear, as demonstrated in this 3D scan of an engine.

Eva HD

Looking at this compound bow 3D model, you can tell that the object it replicates was named compound for a reason.

Leo HD

All the thin edges and angled surfaces of the crankcase, together with its individual structural reinforcements, were captured with unmistakable fidelity.

Leo HD

In just 8 minutes this crankshaft, a core part of a 6-cylinder internal combustion engine, was scanned with Artec Leo in HD Mode.

Leo HD

Thanks to Artec Leo’s onboard automatic processing and in-built HD display, scanning was done in a flash and with no need to worry about any details missed.

Eva HD

Full of smaller, finer details as well as holes, fine lines, sharp edges, and smooth, possibly shiny surfaces, the dual-clutch gearbox becomes a lot easier to scan with Artec 3D’s new HD mode.

Leo HD

Using the new, AI-powered HD Mode, all the thin edges, including the internal reinforcements, as well as the holes of various diameters, and the long, sweeping curves of the aerodynamic exterior were easily captured.

Eva HD

As you can see, the figurine has a very rich and fine geometry from top to bottom – perfect for testing the capabilities of HD Mode.

Eva HD

When it comes to digitizing such fragile historical artifacts as bones, skeletons, and skulls of rare creatures, be it a dinosaur, a mammoth, or ancient human remains, 3D data quality is key.

Leo HD

If you zoom in real close to this goat skull, you may end up immersed in incredible detail for longer than the two minutes it took to scan with the new 2022 Artec Leo.

Eva HD

Hollow areas or surfaces inside the rim that were previously quite tricky to capture in one go have been reconstructed in full detail with no artifacts or noise.

Eva HD

What makes this model special is the ultra-high level of detail and the incredible cleanliness of data that the scanner is able to achieve, all thanks to HD Mode.

Eva HD

Whether intended for reverse engineering or quality inspection, this impressive 3D printable model of compressor would easily fit the bill.

Eva HD

Every stretch of salty exoskeleton, legs, and antennae has been lovingly captured in high-resolution color 3D and reborn in the digital realm.

Leo HD

Scanned with a Leo in HD Mode, this beauty was full of both large, sleek surfaces and small, intricate details.

Eva HD

Have a look at each angle of this 3D model and notice how well everything has been captured — from its finest details to its texture, its ornamental design, and its altogether exquisite appearance.

Eva HD

Effectively 3D scanning such a diminutive 6" × 6" × 4"(15 cm × 15 cm × 10 cm) powerhouse, with its diverse and sundry assemblage of parts, is a formidable challenge for a quality inspection or reverse engineering workflow.

Leo HD

Have a good look around this model and have a look at the lines, the details, the form, and the fact that the 3D model represents the original object with astounding accuracy.

Leo HD

Boosted by the AI-injected feature of Artec Studio 15 called HD Mode, the scanner managed to capture all the teeny details of the engine in high resolution with no help from scanning spray or markers.