3D Models

Cube • Spider II

A watertight 3D-model of a plastic cube produced by ProtoLabs.

Flower • Spider II

Scanning this flower with Artec Space Spider was fairly easy — one just needed to be mindful of perspective change in geometry of the petals once the object was turned over.

Makita case • Spider II

This section of plastic casing for an electric screwdriver is a very interesting object from a 3D scanning point of view.

Stone corner piece • Eva Lite

An architectural piece, scanned with Eva Lite.There's plenty of clearly visible ornaments that makes tracking simple and reliable.

Head sculpture • Eva Lite

This head is a perfect example of a suitable object for Eva Lite - there are no color shifts that Eva with the color camera could have used for tracking enhancement.

Hydrant • Eva

This is a 3D model of a working hydrant on a street in Palo Alto, CA. To scan it, we used an Artec Eva connected to an Artec battery and a tablet for full scanning mobility.

Measuring tape • Spider II

This measuring tape was scanned as a potential demo object.

Panasonic GH4 • Spider II

We scanned our Panasonic GH4 with our Artec Space Spider. This was an untreated scan, so we scanned the camera as-is with no prep.

Ball joint • Spider II

A very simple part to scan and a good example of scanning holes.

Power drill • Spider II

Well used Ridgid power drill scanned with the Artec Spider.

Dragon chalice • Spider II

A novelty chalice, made of plastic, with metal cup inside.

Lu Yu • Spider II

A statue of the Chinese Sage of Tea scanned with Artec Space Spider.

Product part • Spider II

Product part made of plastic. Scanning time was around 5 minutes, and post-processing took about 20 minutes. This is a good example of fast reverse engineering.

Bat-eared fox skull • Spider II

This small and fragile skull of a bat-eared fox was scanned with Artec Space Spider. While the model looks complicated, there were no challenging areas to scan.

Foot mold • Spider II

This metal mold of a child's foot was scanned with Spider in less than one minute.

Full body scan • Eva

We used a tablet and the Artec battery pack so the scanning was really fast. It took only 4 minutes.

Golden column • Eva

An architectural element, scanned with Eva in under 2 minutes. After scanning it was slightly adjusted in 3D modeling software and carved in styrofoam.

Gear • Spider II

A good example of a symmetrical object, which is impossible for other scanners to capture without the application of stickers.

Engine • Combo

The body of the engine and the larger details were scanned with Artec Eva. Spider was used to capture the more intricate geometry.

Tower well valve • Eva

An early 1900’s tower well valve scanned on-site with Artec Eva, connected to a portable battery and a tablet.

Blender 3D models